Skip to content
  1. Home
  2. Scrap we buy
  3. Washing machine scrap
Washing machines

Sell your old washing machine for scrap

Semi-automatic, top load or front load. We'll tell you straight what's valuable inside, including why a heavy front loader isn't worth as much as its weight suggests.

Front load: ₹800–1,500 per piece
What we take

All three types

  • Semi-automatic (twin tub): two motors, one for washing and one for the spin tub
  • Fully automatic top load machines
  • Front load machines, including washer-dryers
  • Loose washing machine motors from repair shops
What affects the price of your old washing machine

The motor pays. The weight can mislead.

  1. 01

    Front loaders: heavy for a reason

    A front-load machine can weigh 60–70 kg, but a good part of that is a concrete counterweight bolted inside to stop it walking across the floor during spin.

  2. 02

    Stainless steel drums

    Front loaders and many top loaders have a stainless steel inner drum, which is worth more than ordinary steel.

  3. 03

    Copper or aluminium motor

    Older and heavier motors are usually copper-wound.

Read the full explanation

Most of a washing machine's scrap value is in its motor, which is wound with copper or aluminium wire. The body is thin steel sheet and plastic.

Front loaders: heavy for a reason

A front-load machine can weigh 60–70 kg, but a good part of that is a concrete counterweight bolted inside to stop it walking across the floor during spin. Concrete has no scrap value. That's why front loaders are priced per piece, not by total weight, and why we explain the price instead of just quoting a number.

Stainless steel drums

Front loaders and many top loaders have a stainless steel inner drum, which is worth more than ordinary steel. Semi-automatics usually have plastic tubs.

Copper or aluminium motor

Older and heavier motors are usually copper-wound. Some newer budget machines use aluminium windings, which pay less. Semi-automatics have two motors, which helps.

Before we arrive

Getting it ready

  • Drain any water left in the drum or pump. Tilting it forward helps.
  • Disconnect the inlet hose and close the tap.
  • Photograph the model sticker (usually on the back or inside the door).
Please don't

Things that lower the price

  • Removing the motor before we see the machine. We price complete machines better.
Washing machine FAQ

Common questions

Why is my front loader worth less than its weight suggests?

Because of the concrete counterweight inside. It can be a large share of the machine's weight and has no scrap value.

Is a semi-automatic worth less than a fully automatic?

Not always. Semi-automatics have two motors, so they can price close to a top loader.

Will you take the stand and trolley too?

Yes. Steel stands are weighed as steel scrap.

Also from the same house

Send a photo of your machine

Include the model sticker if you can. You'll get a price range within 30–45 minutes.

WhatsApp Call